Township Rift Oak

Width 3" | Height 34-1/2" | Depth 3/4"

Base filler that can be trimmed to desire width and height.

Width 96" | Height 3/4" | Depth 2-1/2"

Bead molding which is commonly used between cabinets when stacking, or to cover or transition architectural elements, decorative riser piece, etc...

Width 96" | Height 2-1/2" | Depth 2"

Curved crown molding that will have a height of 2-1/2" once installed and will stick out 2" from the cabinet.

Width 3" | Height 34-1/2" | Depth 24"

Dishwasher end panel with a 3" wide filler on the front. Can be installed on the left or right. Commonly used next to an exposed appliance, like a dishwasher.

Width 3" | Height 30" | Depth 3/4"

Wall filler that can be trimmed to desire width and height.

Width 3" | Height 36" | Depth 3/4"

Wall filler that can be trimmed to desire width and height.

Width 3" | Height 42" | Depth 3/4"

Wall filler that can be trimmed to desire width and height.

Width 3" | Height 96" | Depth 3/4"

Tall filler that can be trimmed to desire width and height.

Width 96" | Height 48" | Depth 1/4"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. The panel will be finished on both sides but not the edges.

Width 96" | Height 48" | Depth .75"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. This panel can also be used as refrigerator panel if one is needed that is deeper than 24". It comes finished on one side, and one of the long and short edges.

Width 96" | Height 3-1/2" | Depth 2-7/8"

Large curved crown molding that will have a height of 3-1/2" once installed and will stick out 2-7/8" from the cabinet.

Width 96" | Height 2" | Depth 2-1/2"

Light rail molding.