Rustic Shaker

Width 8-1/2" | Height 16-5/8" | Depth 15-3/4"

When Rotated: Width 14-1/2" | Height 16-5/8" | Depth 15-3/4"

Chrome universalwastepullout w/single gray 20 qt.container and full extension,ball-bearingslides. This unit is floor mounted. To mount to a door, a door-mounting kit can be added in the drop down area.

Features:

• Perfect for kitchens, laundry room or vanity cabinets.
• Can be configured 2 ways to avoid plumbing.

Specification:

• Width: 8-1/2"
• Depth: 14-5/8"
• Height: 16-5/8"
• Minimum Cabinet Faceframe Opening: 8-1/2"
• Minimum Cabinet Frameless Opening: 8-1/2"
• Number of Containers: 1
• Soft Close: No
• Chrome-plated welded wire frame
• Full-extension, ball-bearing, 100 lb. rated slides
• Clip-on handle
• Mounts to cabinet floor
• Door mounting kit - optional(available in the drop down are to add at an additional cost):RVDM117KIT

Width 13-1/2" | Height 3.13" | Depth 21-1/4"

Maintain shelf space and keep spices within reach with a Wood Classic Door Mount Spice Rack. Made of attractive maple hardwood, this storage saver is available for 18" wide wall cabinets. The spice rack features a UV-Cured clear finish that ensures an acceptable match to most cabinets and easily installs with just four screws.

Features:

• Door-mount spice rack features 3 static shelves.
• Different widths available.
• Installs easily with included mounting hardware.

Specification:

• Width: 13-1/2"
• Depth: 3.13"
• Height: 21-1/4"
• Weight: 2.65
• Minimum Cabinet Faceframe Opening: 14-1/2"
• Minimum Cabinet Frameless Opening: 14-1/2"
• Number of Shelves: 3
• Number of Tiers: 3
• Slides: No
• Soft Close: No
• Gas Assist: No
• Contains Wood: Yes

Width 16-1/2" | Height 3.13" | Depth 21-1/4"

Maintain shelf space and keep spices within reach with a Wood Classic Door Mount Spice Rack. Made of attractive maple hardwood, this storage saver is available for 21" wide wall cabinets. The spice rack features a UV-Cured clear finish that ensures an acceptable match to most cabinets and easily installs with just four screws.

Features:

• Door-mount spice rack features 3 static shelves.
• Different widths available.
• Installs easily with included mounting hardware.

Specification:

• Width: 16-1/2"
• Depth: 3.13"
• Height: 21-1/4"
• Weight: 2.65
• Minimum Cabinet Faceframe Opening: 17-1/2"
• Minimum Cabinet Frameless Opening: 17-1/2"
• Number of Shelves: 3
• Number of Tiers: 3
• Slides: No
• Soft Close: No
• Gas Assist: No
• Contains Wood: Yes

Width 60" | Height 34.5" | Depth 21"

Vanity combination cabinet that has 2 sets of doors on either side of the cabinet, 3 drawers in the middle, and a fake drawer front on top of each set of doors. The top drawer is standard sized and the bottom 2 drawers are deep drawers. The 3 middle drawers are fully functioning and there are no shelves.

Width 36" | Height 24" | Depth 24"

Wall refrigerator cabinet that has 2 doors and 1 adjustable, full depth shelf.

Width 30" | Height 15" | Depth -

Plate rack that holds 10 plates and can also be installed under a shorter wall cabinet.

Width 24" | Height 96" | Depth -

Refrigerator end panel that has a 1/2" thick panel with a 1-1/2"W filler on the front. This refrigerator end panel can be trimmed to desired height and may be used either left or right. This panel comes finished on both sides, however it will have a natural finish, to achieve the knotty appearance, a skin must be purchased to apply to the side of the refrigerator panel. This can be done using the 'View Options' button, or by adding the Rustic Shaker 24x96 Tall Skin (HS-TS2496) under 'Skins and Panels' section under 'Cabinet Accessories'.

Width 30" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 36" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 96" | Height 9/16" | Depth .25"

Rope insert for crown molding (LCM8) that comes in 8 ft long sections. There is a flat section on the crown to accommodate the rope insert installation. If it seems the rope insert will not attach properly, make sure the crown is not upside down.

Width 33" | Height 34.5" | Depth 24"

Sink base cabinet that has no shelves or drawers.

Width 36" | Height 34.5" | Depth 24"

Sink base cabinet that has no shelves or drawers.