Tuscan Cloud

Width 48" | Height 12" | Depth 24"

Lift up refrigerator wall cabinet featuring Blum hardware. There will be no shelf with this cabinet. *Please note that this item is made to order and carries an extended lead time of 6-8 weeks, any items ordered with it, from the same (or matching) collection will also incur the extended lead time.*

Width 48" | Height 30" | Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 46-1/2”
• Front width: 41-7/8”
• Depth of 34-1/2” section: 13-3/4”
• Depth of 29-7/8” section: 4-1/2””
• Max fan size: 46-1/2” x 13-3/4”
• Note that a blower is not included and must be purchased separately

Width 48" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 2 drawers. This cabinet will have a 2-5/8" center stile.

Width 48" | Height 34.5" | Depth 24"

1 door blind base corner cabinet with 1 drawer and 1 shelf. This cabinet can be placed all the way in the corner (without any pull) so it would take up 48" of wall space. It can be pulled a max of 3", taking up 51" of wall space. The door width is 21-1/4", the stile width is 7-3/8" and the blind opening width is 18-3/4". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately.

Width 3/4" | Height 34.5" | Depth 24"

Appliance end panel that finished on two sides and edge-banded on 2 vertical (34-1/2”) edges, there will not be a front stile on this panel.

Width .75" | Height 96" | Depth 12"

Refrigerator end panel. Both 96" sides are edge-banded.

Width .75" | Height 96" | Depth 24"

Refrigerator end panel. Both 96" sides are edge-banded.

Width .75" | Height 96" | Depth 30"

Refrigerator panel that has a 1-1/2" return.

Width .75" | Height 96" | Depth 30"

Refrigerator panel that has a 1-1/2" return.

Width .75" | Height 96" | Depth 30"

Refrigerator panel that has a 3" return.

Width .75" | Height 96" | Depth 30"

Refrigerator panel that has a 3" return.

Width .75" | Height 96" | Depth 30"

Refrigerator end panel. Both 96" sides are edge-banded.