Tuscan Cloud

Width 30" | Height 30" | Depth 21"

Microwave wall cabinet that has a 8-1/2" high lift-up door on top. The microwave opening is 24"W x 13-1/2"H which can be widened to a maximum of 28"W x 19-3/4"H. The cabinet will be pre-finished on both sides to match. **Note this cabinet has a 21" depth**

Width 30" | Height 36" | Depth 21"

Microwave wall cabinet that has two 14-1/2" high doors on top. The microwave opening is 24"W x 13-1/2"H which can be widened to a maximum of 28"W x 19-3/4"H. The cabinet will be pre-finished on both sides to match. **Note this cabinet has a 21" depth**

Width 30" | Height 42" | Depth 21"

Microwave wall cabinet that has two 20-1/2" high doors on top. The microwave opening is 24"W x 13-1/2"H which can be widened to a maximum of 28"W x 19-3/4"H. The cabinet will be pre-finished on both sides to match. **Note this cabinet has a 21" depth**

Width 36" | Height 30" | Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 34-1/2”
• Front width: 29-7/8”
• Depth of 34-1/2” section: 13-3/4”
• Depth of 29-7/8” section: 4-1/2”
• Max fan size: 34-1/2” x 13-3/4”
• Note that a blower is not included and must be purchased separately

Width 42" | Height 30" | Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 40-1/2”
• Front width: 35-7/8”
• Depth of 34-1/2” section: 13-3/4”
• Depth of 29-7/8” section: 4-1/2”
• Max fan size: 40-1/2” x 13-3/4”
• Note that a blower is not included and must be purchased separately

Width 48" | Height 30" | Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 46-1/2”
• Front width: 41-7/8”
• Depth of 34-1/2” section: 13-3/4”
• Depth of 29-7/8” section: 4-1/2””
• Max fan size: 46-1/2” x 13-3/4”
• Note that a blower is not included and must be purchased separately

Width 18" | Height 28.5" | Depth 21"

File base cabinet with a drawer on top and deep file drawer on bottom. Height is 28-1/2". Interior top drawer height is 3", exterior file drawer height is 16-1/2" and the sides of the file drawer are 11-1/8" high. File rack is not included.

Width 14.625" | Height " | Depth 22"

Small trimmable cutlery divider made of UV coated maple wood and a 3/8" plywood bottom. The dividers will be 3/8" thick, and the interior height is 1-3/8". ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 22.625" | Height " | Depth 22"

Large trimmable cutlery divider made of UV coated maple wood and a 3/8" plywood bottom. The dividers will be 3/8" thick, and the interior height is 1-3/8". ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 12" | Height 34.5" | Depth 21"

Vanity base cabinet with (1) door, (1) drawer, and (1) 15" deep shelf. There will be a 2" clearance between the drawer and back panel. The drawer front is 6-3/4" high.

Width 12" | Height 34.5" | Depth 21"

Full height door vanity base cabinet with (2) adjustable 15" deep shelves.

Width 12" | Height 34.5" | Depth 21"

3-drawer vanity base cabinet. Top drawer front is 6-3/4", middle and bottom drawer fronts are 11-1/4" high. There will be a 2" clearance between the drawers and back panel.