Milan Cafe

Width 48" | Height 12" | Depth 24"

Lift-up door wall cabinet that will not have any shelves.

Width 48" | Height 23-7/8" | Depth 24"

2 door range top base cabinet that comes with (1) adjustable shelf and a full top panel that will need to be cut on site to accommodate the range. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 48" | Height 23-7/8" | Depth 24"

2 drawer range top base cabinet that comes with (2) 11-7/8" high drawers (drawer front height) and a full top panel that will need to be cut on site to accommodate the range. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 3" | Height 30" | Depth 3/4"

Base filler that comes as a flat panel and will not have a toe-kick recessed area on the bottom. It will be finished on two sides and edge-banded on all four edges.

Width 3" | Height 30" | Depth 3/4"

Wall filler that will be finished on two sides and edge-banded on all four edges.

Width 3" | Height 30" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.

Width 3" | Height 30" | Depth 13-7/8"

Wall column that can be trimmed on site if needed. The sides will be flush and finished, and the back will be unfinished.

Width 3" | Height 30" | Depth 13-7/8"

Wall end panel with a filler attached to the front that will be finished on two sides and edge-banded on all four edges. The filler on the front will be flush with the side and can be cut down if needed. If it is cut, to avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off).

Width 3" | Height 34-1/2" | Depth 24-7/8"

Base column that can be trimmed on site if needed. The sides will be flush and finished, and the back will be unfinished.

Width 3" | Height 34-1/2" | Depth 24-7/8"

Appliance end panel with a 3" return which consists of a filler interlocked with a 1/2" plywood return panel. The exposed sides will have near-flush finished ends. The front can be trimmed down to 1" wide if necessary (edge banding may be needed in order to finish the cut edge). The sides will be flush and finished and all four edges are edge-banded.

Width 3" | Height 36" | Depth 3/4"

Wall filler that will be finished on two sides and edge-banded on all four edges.

Width 3" | Height 36" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.