Milan Cafe

Width 12" | Height 30" | Depth 13"

1 door wall cabinet that has 2 adjustable shelves.

Width 12" | Height 36" | Depth 13"

1 door wall cabinet that has 2 adjustable shelves.

Width 12" | Height 42" | Depth 13"

1 door wall cabinet that has 3 adjustable shelves.

Width 12" | Height 30" | Depth 24"

1 door base cabinet with (1) 18" deep adjustable shelves and 1 drawer. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 12" | Height 30" | Depth 24"

1 full height door base cabinet with (2) 18" deep adjustable shelves. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 12" | Height 30" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-7/16" separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 12" | Height 30" | Depth 24"

4 drawer base cabinet. Top 3 drawer fronts are 6-3/4" high and the bottom drawer front is 9-3/16" separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 3" | Height 30" | Depth 3/4"

Base filler that comes as a flat panel and will not have a toe-kick recessed area on the bottom. It will be finished on two sides and edge-banded on all four edges.

Width 3" | Height 30" | Depth 3/4"

Wall filler that will be finished on two sides and edge-banded on all four edges.

Width 3" | Height 30" | Depth 3"

Corner filler that can be used instead of a blind corner cabinet. It will fill a gap between two cabinets in a corner, allowing the doors and drawers to still function properly, this will leave a void under the countertop.

Width 3" | Height 30" | Depth 13-7/8"

Wall column that can be trimmed on site if needed. The sides will be flush and finished, and the back will be unfinished.

Width 3" | Height 30" | Depth 13-7/8"

Wall end panel with a filler attached to the front that will be finished on two sides and edge-banded on all four edges. The filler on the front will be flush with the side and can be cut down if needed. If it is cut, to avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off).