Milan Black Matte

Width 36" | Height 30" | Depth 21"

Heat shield that is 1/16" thick powder-coated steel, with pre-drilled installation holes. It will need to be cut to size and must be used on either side of a range base cabinet to shield the adjacent cabinet boxes from the oven heat (also recommended to be used on either side of a range top). Sold in quantities of 1, a quantity of 2 must be ordered to received 2 heat shields.

Width 6" | Height 96" | Depth 3/4"

Tall filler that will be finished on two sides and edge-banded on all four edges.

Width 15-7/8" | Height 54" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 54" high wall cabinet with drawers, with a depth of 15". Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 24-7/8" | Height 89-7/8" | Depth 3/4"

Wainscot tall panel set of 2 doors, to be used on the exposed side of an 90" tall cabinet with a 24" depth. It will match the door style of the cabinets being ordered. The bottom door will be 49-1/2" high and the top door will match the remaining height of the cabinet. Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 24" | Height 30" | Depth 21"

Vanity sink base cabinet with 2 doors and 1 false drawer front. Drawer front is 6-3/4" high. This cabinet will not have any shelves. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 33" | Height 30" | Depth 21"

Vanity sink base cabinet with 2 full height doors and 2 shelves. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 3" | Height 30" | Depth 3/4"

Base filler that comes as a flat panel and will not have a toe-kick recessed area on the bottom. It will be finished on two sides and edge-banded on all four edges.

Width 30" | Height 96" | Depth 3/4"

Refrigerator end panel that is finished on both sides and edgebanded on all edges.

Width 15" | Height 30" | Depth 21"

3-drawer vanity base cabinet. Top drawer front is 6-3/4", middle and bottom drawer fronts are 11-7/16" high. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 6" | Height 42" | Depth 3/4"

Wall filler that will be finished on two sides and edge-banded on all four edges.

Width 13-7/8" | Height 29-7/8" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 30" high wall cabinet with a depth of 13". Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 3" | Height 96" | Depth 3/4"

Tall filler that will be finished on two sides and edge-banded on all four edges.